• [email protected]

Advanced Trends in Mechanical Engineering

  • Home
  • Conference proceedings
  • Registration & manuscript submission
  • Organizers and speakers
  • Contacts

Advanced Trends in Mechanical Engineering

Fergana Polytechnic Institute (Uzbekistan) and Belgorod State Technological University named after V.G. Shukhov (Russian) announce the International Scientific Conference “Advanced Trends in Mechanical Engineering”. The conference will be held from March 14 to September 15, 2022.

The general purpose of the “Advanced Trends in Mechanical Engineering” conferences is to provide opportunities for scientists and engineers from all over the world to meet and to discuss current research on a broad range of subjects. Fergana Polytechnic Institute (Uzbekistan) and Belgorod State Technological University named after V.G. Shukhov (Russian) are a very suitable places, well provided with conference facilities, have an equipped material and technical base, and this makes it feasible to hold such meetings.

The fact that “Advanced Trends in Mechanical Engineering” conferences is organized for the International Scientific Community should be kept in mind. Qualified scientists from all countries are of course welcome as participants.

This Conference is broad in scientific scope, is open to all those interested, and is expected to have a number of participants between 150 and 600.

The purpose of the conference is to generalize domestic and world experience in Mechanical Engineering, to preserve the continuity of scientific schools, to form a new level of training professional staff, and to strengthen scientific and business contacts.

The Conference Editorial Board welcomes manuscripts in both fundamental and applied research areas, and encourages submissions which contribute novel and innovative insights to the field of Mechanical Engineering. All submitted articles considered suitable for “Advanced Trends in Mechanical Engineering” conference are subjected to rigorous peer review to ensure the highest levels of quality.

The language of the Conference submitted papers is English.

Participation format:

– full-time with oral presentation;

– full-time with poster report.

The following sections are planned:

14 March Monday

Fergana Polytechnic Institute, Uzbekistan, Fergana, 46 Fergana st., VENUE 1

Session 1. Mechanical Engineering.

 

15 March Tuesday

BSTU named after V.G. Shukhov, Russia, Belgorod, 46 Kostyukova st., VENUE2

Session 2. Machinery and Machine Elements.

PAPERS’ PUBLISHING IN SCOPUS INDEXED JOURNAL BASED ON THE RESULTS OF THE CONFERENCE

  • Scientific manuscripts corresponding to the profile of the conference and reflecting the results of theoretical and experimental studies of the authors are accepted for publication. It is not allowed to send already published articles to the Organizing Committee, or articles sent for publication to other journals/institutions.
  • Articles sent for publication should be formatted strictly according to the journal template. The organizing committee reserves the right not to accept work submitted and submitted with deviations from the established requirements.
  • Once a manuscript is submitted for publication, the manuscript is checked by the journal’s editorial office to ensure that it is suitable to go through the normal peer review process. Once this is done, the manuscript is sent to an appropriate Editor based on the subject of the manuscript and the availability of the Editors. All manuscripts shall be handled by an Editor who is not from the same institute as any of the manuscript’s authors. If the Editor finds that the manuscript may not be of sufficient quality to go through the normal peer review process, or that the subject of the manuscript may not be appropriate for the journal’s scope, the manuscript shall be rejected with no further processing. If the Editor finds that the submitted manuscript is of sufficient quality and falls within the scope of the journal, they should assign the manuscript to at least two external reviewers for peer-review who make recommendations on the suitability of the articles for publication.
  • The article should have the following sections (IMRaD format requirements): article title, authors (indicating academic degree, title and organization), keywords, abstract, introduction, materials and methods, results, discussions, conclusion, list of references. Information on financial support is indicated in the Acknowledgments section after the Conclusion.
  • The maximum number of authors of one article is no more than 4. The number of articles that one author can publish in a one issue is no more than 3. The volume of the article: 7 full pages (no more!), including a list of references. Originality of the research paper shouldn’t be less than 80%.
  • Papers are published only in English.
  • All articles are peer-reviewed by a specialist with a degree. The results of the review of manuscripts of scientific articles are sent within 20 calendar days by e-mail.

PUBLISHING ETHICS

Please review the publication ethics guidelines developed by ELSEVIER PUBLICATION ETHICS and the COPE’S BEST PRACTICE GUIDELINES for journals editors. Conference Editorial Board use native Russian-language plagiarism detection software Antiplagiat to screen the submissions. If plagiarism is identified, the COPE guidelines on plagiarism will be followed. If themanuscript contains figures or tables taken from other sources, the author must obtain appropriate permission to reproduce them from the relevant publishers.

If the article uses data, numbers, tables, figures / videos, or text quotes from copyrighted works (including websites), then permission from the original publisher and author (s) must be obtained for both print and publication. in online format. If excerpts from copyrighted works (including websites) such as illustrations, tables, animations, or text quotations are included in your manuscript, please obtain permission from the copyright holder (usually the original publisher) for both the print and online format. Refer to the Rights Link http://www.copyright.com/publishers/rightslink-permissions/ or use the attached Permission Request Form. For any material you wish to reuse, you must obtain permission from the previous publisher. Permission Request Form (Springer), fill out and get permission. A color scan of this form should be submitted along with your article.

SPRINGER LAST CONFERENCES PROCEEDINGS

International Scientific Conference “BuildInTech BIT 2020. Innovations and Technologies in Construction”: https://www.springer.com/gp/book/9783030546519

International Scientific Conference “Industrial and Civil Construction 2021”: https://www.springer.com/gp/book/9783030689834

International Scientific Conference “BuildInTech BIT 2021. Innovations and Technologies in Construction”: https://www.springer.com/gp/book/9783030729097

 

Registration & manuscript submission

Статья:
Прикрепить регистрационную форму:

Important dates

Paper submission deadline: submission period  is opened

Registration deadline (sessions): until March 14, 2022.

Conference dates: March 14-15, 2022.

Conference proceedings publication: within 2-5 months after the conference.

Organizers and speakers

Organizing Conference Committee

Salomov U.R.
Doctor of Sciences , Rector, Fergana Polytechnic Institute, Uzbekistan
Khamrakulov Z.A.
Doctor of Sciences, Vice - Rector for Science and Innovation, Fergana Polytechnic Institute, Uzbekistan
Evtushenko E.I.
Doctor of Engineering Sciences (Advanced Doctor), Professor, Belgorod State Technological University named after V.G. Shukhov, Russia
Davydenko T.M.
Doctor of Pedagogical Sciences (Advanced Doctor), Professor, Belgorod State Technological University named after V.G. Shukhov, Russia
Klyuev S.V.
Candidate of Engineering Sciences (PhD), Associate Professor, Belgorod State Technological University named after V.G. Shukhov, Russia
Bogdanov V.S.
Doctor of Engineering Sciences (Advanced Doctor), Professor, Belgorod State Technological University named after V.G. Shukhov, Russia
Duyun T.A.
Doctor of Engineering Sciences (Advanced Doctor), Professor, Belgorod State Technological University named after V.G. Shukhov, Russia
Alfimova N.I.
Candidate of Engineering Sciences (PhD), Associate Professor, Belgorod State Technological University named after V.G. Shukhov, Russia
Kozhukhova N.I.
Candidate of Engineering Sciences (PhD), Associate Professor, Belgorod State Technological University named after V.G. Shukhov, Russia

Scientific Conference Committee

Alimatov B.A.
Russia – Doctor of Engineering Sciences (Advanced Doctor), Professor, Belgorod State Technological University named after V.G. Shukhov
Tizhev R.Z.
Uzbekistan – Doctor of Technical Sciences, Professor, Head Department "Technological machines and equipment", Fergana Polytechnic Institute
Bratan S.M.
Russia – Doctor of Engineering Sciences (Advanced Doctor), Professor, Sevastopol State University
Watekhovich P.E.
Republic of Belarus – Doctor of Technical Sciences, Professor of the Department of Machines and Apparatuses of Chemical and Silicate Production, Belarusian State Technological University
Stefan Vöth
Germany – PhD, Professor, Technische Hochschule Georg Agricola
Rahul Ramachandran
USA – PhD, Mechanical Engineering Department, University of Nevada
İsmail Ridvanov
Turkey – Head of the Mechanical Design Group, Research and Development Department
Kozlov A.M.
Russia – Doctor of Engineering Sciences (Advanced Doctor), Professor, Head of the Department of Mechanical Engineering Technology, Lipetsk State Technical University
Nenad Pavlovich
Serbia – PhD, Vice Rector for Research and Publishing, Proffessor Machine-building faculty of the, State Niche University
Sivachenko L.A.
Republic of Belarus – Doctor of Technical Sciences, Professor of Departments of transport and technological machines of the, Belarusian Russian University
Fasimatov Sh.N.
Uzbekistan – Doctor of Technical Sciences, Professor of the Department "Technology Mechanical Engineering", Fergana Polytechnic Institute
Sabirov B.A.
Uzbekistan – Candidate of Technical Sciences, Associate Professor, Urgench State University
Sevryugina N.S.
Russia – Candidate of Engineering Sciences, Associate Professor, Department of technical operation of technological machines and environmental engineering equipment, Institute of Engineering and energy named after V.P. Goryachkin, Russian State Agrarian University – Moscow Timiryazev Agricultural Academy
Abolfazl Soltani
Iran – PhD, Shahid Rajaee Teacher Training University
A. Ramachandra Murthy
India – PhD, CSIR Structural Engineering Research Centre
Doo Yeol Yoo
South Korea – PhD, Hanyang University
Kovtun M.A.
Australia – PhD
Kozhukhova M.I.
the USA – PhD, University of Wisconsin-Milwaukee
Mohammad Ali Asaad
Iraq – PhD, Iraq University College
Mohammad Ali Mosaberpanah
Cyprus – PhD, Cyprus International University
Mugahed Amran
Saudi Arabia – PhD, Prince Sattam Bin Abdulaziz University
Murali Gunasekaran
India – PhD, SASTRA Deemed University
Navid Ranjbar
Denmark – PhD, Danmarks Tekniske Universitet
Natt Makul
Thailand – PhD, Rajabhat University
Salyamova K.D.
Uzbekistan - Doctor of Engineering Sciences (Advanced Doctor), Professor, Institute of Mechanics and Seismic Stability of Structures of the Academy of Sciences of the Republic of Uzbekistan
Sovann Chin
Cambodia – PhD
Suhana Koting
Malaysia – PhD, University of Malaya
Fisher H.B.
Germany - Professor, Bauhaus-University of Weimar
Hakim S. Abdelgader
Libya – PhD, University of Tripoli
Hossein Mohammadhosseini
Malaysia – PhD, Universiti Teknologi Malaysia
Qianqian Zhao
China – PhD, Northeast Forestry University
Chu S.H.
Hong Kong – PhD, The University of Hong Kong
Elyan Issa Jamal Issa
Jordan – PhD, Amman University
Eknik Jürgen
Switzerland – PhD, Professor, Executive Director of a Swiss Company, Perfomance Selling Academy Zurich Area GmbH
Shakarna Mahmoud Husni Ibrahim
Palestine – PhD
Zhang Yunsheng
China – PhD, Southeast University
Yassine Senhadji
Algeria – PhD, University Mustapha Stambouli of Mascara
  • Home
  • Current Conferences
  • Past conferences
  • Contacts

@ Copyright 2023 CONFERENCE WITH THE PUBLICATION IN JOURNALS INCLUDED IN SCOPUS/WOS. All Rights Reserved

  • Home
  • Current Conferences
  • Past conferences
  • Contacts